Finite Element Simulation and Experimental Analysis of Cutting Forces in Orthogonal Turning in AISI-1045 Steel

Authors

  • Marco Antonio Prieto Juárez Universidad de Guanajuato, Campus Irapuato-Salamanca
  • Eduardo Aguilera Gómez Universidad de Guanajuato, Campus Irapuato-Salamanca
  • Héctor Plascencia Mora Universidad de Guanajuato, Campus Irapuato-Salamanca
  • Elías Ledesma Orozco Universidad de Guanajuato, Campus Irapuato-Salamanca
  • Juan Francisco Reveles Arredondo Universidad de Guanajuato, Campus Irapuato-Salamanca
  • Martha Libia Campos Silva Universidad de Guanajuato, Campus Irapuato-Salamanca

DOI:

https://doi.org/10.13053/cys-23-1-3134

Keywords:

Orthogonal cutting FEM simulation, Johnson-Cook material model, cutting forces

Abstract

In this paper, a methodology to simulate the orthogonal metal turning and cutting forces using finite element method is presented. To validate the numerical results obtained from the model, experimental turning tests were performed on AISI-1045 steel, a dynamometer and an acquisition software were used to obtain experimental cutting forces. These forces were used to calculate the global friction coefficient, then, finite element method simulation of cutting metal process was done, using the Johnson-Cook material model and APDL code in a FEM software. Components of the cutting force were analyzed in the experiment tests and simulations for three carbide tools obtaining good correlation between them.

Downloads

Published

2019-03-24

Issue

Vol. 23 No. 1 (2019): Recent Advances in Optics and Photonics (Guest Editors: J. J. Sánchez Mondragón, M. Torres Cisneros, R. Guzmán Cabrera)

Section

Articles of the Thematic Issue

License 

Hereby I transfer exclusively to the Journal "Computación y 
Sistemas", published by the Computing Research Center (CIC-IPN),
the Copyright of the aforementioned paper. I also accept that these 
rights will not be transferred to any other publication, in any other 
format, language or other existing means of developing.
I certify that the paper has not been previously disclosed or simultaneo
usly submitted to any other publication, and that it does not contain 
material whose publication would violate the Copyright or other 
proprietary rights of any person, company or institution. I certify that 
I have the permission from the institution or company where I work or 
study to publish this work.
The representative author accepts the responsibility for the publication
of this paper on behalf of each and every one of the authors. 
This transfer is subject to the following conditions:
  • The authors retain all ownership rights (such as patent rights) of this work, except for the publishing rights transferred to the CIC, through this document.
  • Authors retain the right to publish the work in whole or in part in any book they are the authors or publishers. They can also make use of this work in conferences, courses, personal web pages, and so on.
  • Authors may include working as part of his thesis, for non-profit distribution only.