Nonminimum Phase System and Control Design Applied to MEM Parallel-Plates

Authors

  • Karen Alicia Aguilar Cruz Instituto Politécnico Nacional, Centro de Investigación en Computación
  • Romeo Urbieta Parrazales Instituto Politécnico Nacional, Centro de Investigación en Computación
  • José de Jesús Medel Juárez Instituto Politécnico Nacional, Centro de Investigación en Computación

DOI:

https://doi.org/10.13053/cys-23-2-3215

Keywords:

Parallel-plate characterization, phase advance control, nanotechnologies

Abstract

The miniaturization or nanotechnology applied in control systems, redesigning various areas of science and technology where in researches requires using nanoforms improving the local responses, and at the same time, working in parallel and sequential nanosystems. These studies, name MEMs' Control, requires knowing the control parameters and ranges operation. Commonly used in classical control applied now, to the nanostructures to be controlled. In our case, we present an example consisting in a modern analysis control not yet realized; observing the evolution process trajectory control, and simulation of nano-displacements in a specific case viewed throughout linear and nonlinear evolution concerning parallel plates described as a system to be controlled. Operating ranges considered the mechanical forces in transition and deformation plastic region. Therefore, we propose a nonminimum-phase control technique because it is efficient, precise, and high-performance technique. Under these considerations, the control parameters selected going to embedded in a nano control device that adjusting the digital nanodevice used in nanofluids precision.

Downloads

Published

2019-06-28

Issue

Vol. 23 No. 2 (2019): Topic Trends in Computing Research (Guest Editors: A. Aguilar Meléndez, E. U. Moya Sánchez)

Section

Articles

License 

Hereby I transfer exclusively to the Journal "Computación y 
Sistemas", published by the Computing Research Center (CIC-IPN),
the Copyright of the aforementioned paper. I also accept that these 
rights will not be transferred to any other publication, in any other 
format, language or other existing means of developing.
I certify that the paper has not been previously disclosed or simultaneo
usly submitted to any other publication, and that it does not contain 
material whose publication would violate the Copyright or other 
proprietary rights of any person, company or institution. I certify that 
I have the permission from the institution or company where I work or 
study to publish this work.
The representative author accepts the responsibility for the publication
of this paper on behalf of each and every one of the authors. 
This transfer is subject to the following conditions:
  • The authors retain all ownership rights (such as patent rights) of this work, except for the publishing rights transferred to the CIC, through this document.
  • Authors retain the right to publish the work in whole or in part in any book they are the authors or publishers. They can also make use of this work in conferences, courses, personal web pages, and so on.
  • Authors may include working as part of his thesis, for non-profit distribution only.