Volume Measurement System Based on Hall Effect Sensors Circularly Coupled and Arranged in a Quadrature Shape
DOI:
https://doi.org/10.13053/cys-25-2-3904Keywords:
Magnetic sensor, Hall effect, volume measurement, ZigBee protocolAbstract
In this research work, a compact electronic system for measuring volumes in generic cylindrical containers was designed and developed. The system is based on a circular arrangement composed of four Hall effect sensors A1324 and arranged in the form of a quadrature. The theoretical volume calculations obtained based on the angle of inclination of the float for a cylindrical container were correlated with a polynomial function of order 3 with an R2 = 0.99. The analog voltage signal correlated with the theoretical volume was digitized through a microcontroller and a ZigBee transceiver was used as a data transmission channel and through a ZigBee Xbee ZB24 transceiver was used for information transfer. The experimental and theoretical results obtained corroborate a highly accurate and reliable measurement system, which can be applied to different containers and different types of fluids that are to be monitored remotely. Finally based on the theoretical model, this system could be scaled to cylindrical containers of greater capacity without modifying the conditions of the electronic system with the array of Hall effect sensors.Downloads
Published
2021-05-01
Issue
Section
Articles
License
Hereby I transfer exclusively to the Journal "Computación y Sistemas", published by the Computing Research Center (CIC-IPN),the Copyright of the aforementioned paper. I also accept that these
rights will not be transferred to any other publication, in any other format, language or other existing means of developing.I certify that the paper has not been previously disclosed or simultaneously submitted to any other publication, and that it does not contain material whose publication would violate the Copyright or other proprietary rights of any person, company or institution. I certify that I have the permission from the institution or company where I work or study to publish this work.The representative author accepts the responsibility for the publicationof this paper on behalf of each and every one of the authors.
This transfer is subject to the following conditions:- The authors retain all ownership rights (such as patent rights) of this work, except for the publishing rights transferred to the CIC, through this document.
- Authors retain the right to publish the work in whole or in part in any book they are the authors or publishers. They can also make use of this work in conferences, courses, personal web pages, and so on.
- Authors may include working as part of his thesis, for non-profit distribution only.