Optimization of PPF Control of a Building-like Structure for Vibration Control

Authors

  • J Enríquez-Zárate Universidad Panamericana, Facultad de Ingeniería, Aguascalientes
  • Leonardo Trujillo Tree-Lab, Posgrado en Ciencias de la Ingeniería, Instituto Tecnológico de Tijuana
  • G K Toledo-Ramírez Centro de Ingeniería y Desarrollo Industrial, Querétaro
  • Ángel J Ramos-Cirilo Universidad de Ciencias y Artes de Chiapas, Instituto de Ciencias Básicas Aplicadas Centro de Investigación y Desarrollo Tecnológico en Energías Renovables, Chiapas
  • C Hernández Centro de Investigación y de Estudios Avanzados del IPN. Departamento de Computación

DOI:

https://doi.org/10.13053/cys-22-2-2945

Keywords:

smart materials, active vibration control, PZT actuator, optimization

Abstract

This work presents a research on intelligent civil structures, like bridges and buildings, which consists in the use of sensors and actuators to monitor and control some specific parameters of the structures. A recent technological breakthrough has been the development of piezoelectric actuators or sensors using special materials, such as Lead Zirconate Titanate (PZT), magnetorheological dampers, shape memory, and others. In particular, the use of smart materials in the structural control of buildings is an interesting and promising subject in civil engineering. The method of active control is used to reduce the negative effects of external forces or perturbations on the performance of the overall system. These forces can be expressed mainly in terms of the effects of winds or earthquakes. This article presents a case of study of a building-like structure perturbed in the ground-borne by an external force and controlled through an active control applied with a PZT actuator joined in a column of the structure. The scheme of control consists in a modal control known as Positive Position Feedback (PPF), which aims to reduce the vibrations in the building-like structure. The gains of PPF control are tuned using an optimization method known as Differential Evolution combined with the Interior Point Algorithm. Experimental and numerical results are shown with the purpose of analyzing the efficiency of the control in the presence of an exogenous force in the dynamics of the system. The numerical results of the optimized PPF control are interesting and promising, reducing the vibrations and lateral displacements by around 97% of the building-like structure.

Downloads

Published

2018-06-29

Issue

Vol. 22 No. 2 (2018): Thematic Issue on Numerical and Evolutionary Optimization (Guest editors: L. Trujillo, Y. Maldonado, O. Schuetze)

Section

Articles of the Thematic Issue

License 

Hereby I transfer exclusively to the Journal "Computación y 
Sistemas", published by the Computing Research Center (CIC-IPN),
the Copyright of the aforementioned paper. I also accept that these 
rights will not be transferred to any other publication, in any other 
format, language or other existing means of developing.
I certify that the paper has not been previously disclosed or simultaneo
usly submitted to any other publication, and that it does not contain 
material whose publication would violate the Copyright or other 
proprietary rights of any person, company or institution. I certify that 
I have the permission from the institution or company where I work or 
study to publish this work.
The representative author accepts the responsibility for the publication
of this paper on behalf of each and every one of the authors. 
This transfer is subject to the following conditions:
  • The authors retain all ownership rights (such as patent rights) of this work, except for the publishing rights transferred to the CIC, through this document.
  • Authors retain the right to publish the work in whole or in part in any book they are the authors or publishers. They can also make use of this work in conferences, courses, personal web pages, and so on.
  • Authors may include working as part of his thesis, for non-profit distribution only.